How do I use my electric wall diffuser?

The Electric Wall Diffuser is part of the "Un Air de Diptyque" collection. It is original and unique due to its exclusive fragrance release process, which relies on air circulation to diffuse the scent and ensures the highest fidelity to every note of the fragrance. Choosing and changing the made possible with "Un Air de Diptyque."

This new diffuser complements the range with its portable approach. Aesthetic, compact, and practical, it is easy to use and move from one room to another. You can also take it with you in a suitcase, using it to scent any place you might visit. It comes with power cords for the EU, US, Japan, UK, Canada, Australia/New Zealand, and Korea.

You will find the assembly instructions inside the product box.

Below, we have highlighted some key points about our wall diffuser to explain how this product works and to help you get the best use out of it:

• It is recommended to use the electric wall diffuser to scent medium-sized spaces (25 m²).
• Once the device is plugged in, start the ventilation system using the sensor located on the front of the unit. Simply touch the front of the diffuser for one second: a gentle stream of air indicates that the device is working.
• Replacement caps are available upon request.
• Use the sensor to turn off the ventilation system manually by touching the diffuser’s scent for one second. The diffuser automatically turns off after a pre-programmed two-hour cycle.
• Keep the electric wall diffuser and the scented cartridge out of reach of children and animals.
• Do not handle the diffuser with wet hands and avoid contact with water.
• We strongly advise against placing the electric wall diffuser near a heat source, such as a radiator or fireplace.
• Do not open the black case of the diffuser or that of the scented cartridge.
• Use the electric wall diffuser indoors only.
• Before opening the ventilation grille to change the scented cartridge, make sure the device is unplugged.

Here are the assembly steps for your diffuser: 

                                               case     ;             grille                                tips

1. Insert the tip suitable for the electrical system into the case and then screw it in.

To change the tip, press the unlock button while unscrewing.

2. Open the electric wall diffuser by removing the grille at the front.

3. Install the scented cartridge (sold separately) into the case’s compartment.

4. Close the case by gently replacing the grille.

5. Plug the diffuser into an appropriate electrical outlet.

6. To turn the electric wall diffuser on or off, touch anywhere on the grille for one second. A gentle stream of air signals that the ventilation system is on. 

Feel free to purchase the electric wall diffuser here.